首頁> 産品中心> 催化劑樹脂

固體堿催化劑樹脂A-8XMP


産品詳情:

Tulsimer ® A-8X MP催化劑級大孔弱堿性陰離子交換樹脂

Tulsimer ® A-8X MP 是一款大孔催化劑級的弱堿性陰離子交換樹脂,主要用于催化作用和一些化學制程中,特別是在MEG淨化中。工業生産中催化劑和一些化學制程中離子交換樹脂的使用正在變得越來越重要。與同種的催化劑相比他們具有下列優勢:

  a.容易處理。

  b.降低或去除廢棄物處理的問題。

  c.提高産品的純度和産量。

  d.比使用同等催化作用的酸的成本低。

  e.排除或者大大的減弱腐蝕問題。

  f.強力的抗汙染能力,在經過去汙染處理後能恢複原來性能。

Tulsimer ® A-8X MP 化劑級樹脂具有出色的物理和化學性能,並且極耐磨損。且這種樹脂具有良好的熱穩定性和可再生使用性能。

 A-8X-MP.jpg

典型特性(TYPICAL CHARACTERISTICS):Tulsimer ® A-8X MP          

樹脂類/Resin Type                                    大孔弱堿性陰離子交換樹脂

官能團/Functional group                                 聚苯乙烯共聚物

物理型式/Physical form                                  濕潤球狀/Moist spherical beads

離子型式/Ionic form supplied                             遊離堿/Free base form

官能團/Functional group                                 叔胺基/Tertiary amine

粒度分布/Particle size Distribution                         0.3 - 1.2 mm 

膨脹率/Swelling(approx. )                                 遊離堿->Cl- 18%

目數/Screen size USS (濕)                                 16 to 50

PH 範圍/PH range                                       0 - 9

總交換量/Total exchange capacity( meq/ml )                 1.3 meq/ml mini

容積密度/Backwash settled density                         640 - 680 gm/lit(40 - 42 lbs/cft)

最大溫度/Maximum Thermal Stability                       80℃(175℉)

濕度/Moisture content                                   55±3%

溶解度/Solubility                                        不溶

 

操作條件特性 TYPICAL OPERATING CONDITIONS Tulsimer ® A-8X MP  

樹脂床高度/Resin bed depth                              600 mm

最大流速/Maximum service flow                           40m³/hr/m³

逆洗膨脹空間/Backwash expansion space                   50 - 70%

逆洗膨脹空間/Backwash expansion flow rate(25)           4 - 6m³/hr/㎡   

再生劑/Regenerant                                      NaOH, Na2CO3,NH4OH

再生程度/Regeneration level                              120% of the operating capacity for NaOH                                  

再生濃度/Regeneration concentration                      1 - 5%

再生時間/Regeneration time                              20 - 60 分鍾

操作溫度/Maximum Operating temperature                 80℃ max

沖洗流速/Rinse flow rate:

/slow                                                再生流速/At Regeneration flow rate

/fast                                                 工作流速/At service flow rate

沖洗體積/Rinse volume                                   2 - 7m³/m³

余氯/Free chlorine                                       未檢測到/Not traceable
渾濁度/Turbidity                                        小于2 NTU/Less than 2 NTU
鐵和重金屬/Iron and heavy metals                         小于0.1ppm/Less than 0.1 ppm

  

測試(TESTING):Tulsimer ® A-8X MP                                

離子交換樹脂的抽樣和測試是按標准的測試程序,即ASTMD - 2187和IS - 7330,1998.

 

包裝(PACKING):Tulsimer ® A-8X MP                                

For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.

   For further information, please contact: